Buy KP3A Bearing Ball Airfra part by Timken Corporation

Part Number: KP3A

Manufacturer: timken corporation

NSN: 3110-00-142-4451

NIIN: 001424451

Item Name : bearing ball airfra

CAGE Code: 21335

FSC: 3110 Bearings Antifriction Unmounted

INC Code: 00041

Country: USA

NCB Code: 00

FSG: 31 Bearings

We've received your request for KP3A (described as Bearing Ball Airfra), manufactured by Timken Corporation with CAGE code 21335. This part is registered under NSN 3110-00-142-4451, classified in FSG 31 Bearings / FSC 3110 Bearings Antifriction Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 00-142-4451, NCB code 00 (origin: USA), and INC 00041. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your KP3A requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for KP3A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part KP3A, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number KP3A with NSN 3110-00-142-4451, 3110001424451

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-142-4451 Item PartTypeName: BEARING,BALL,AIRFRAME	3110	001424451		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
248531	1	9	5

Characteristics Data of NSN 3110-00-142-4451, 3110001424451

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.2244 INCHES MINIMUM AND 0.2344 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.2919 INCHES MINIMUM AND 0.2969 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZC	LOAD DIRECTION	RADIAL
AGZH	INTERNAL FIT-UP DESIGNATION	STANDARD
CTFZ	STANDARD TOLERANCE DESIGNATION	AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
FTLD	FUNCTIONAL DESCRIPTION	INTMD DUTY ACFT CONT SYS
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	RUBBER SYNTHETIC AND STEEL CORROSION RESISTING SEAL
MATT	MATERIAL	STEEL COMP E51100 OR STEEL COMP E52100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MATT	MATERIAL	STEEL COMP E52100 OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66,UNS G51986 FED STD 1ST MATERIAL RESPONSE OR 66,UNS G52986 ASSN STD 2ND MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66,UNS G52986 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66,UNS G52986 FED STD SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	RUBBER COMP AND CRES MFR REF ALL MATERIAL RESPONSES SEAL
RTSE	RELATIONSHIP TO SIMILAR EQUIPMENT	SIMILAR TO NSN 3110-00-027-8758
SFTT	SURFACE TREATMENT	CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
STYL	STYLE DESIGNATOR	SINGLE ROW INNER RING EXTENDED BOTH SIDES
SUPP	SUPPLEMENTARY FEATURES	NOT TO BE RELUB
TMDN	TYPE/MODEL DESIGNATION	KP-A
ZZZK	SPECIFICATION/STANDARD DATA	88044-AN201/CANCELED/ GOVERNMENT STANDARD AND 96906-MS20201/CANCELED/ GOVERNMENT STANDARD

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482105068 (NAICS 332991)	Ball bearings, nesoi
SITC : 74610	Ball bearings

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	P - 77.5
LTL:	P - 77.5
NMFC:	114820 - Bearings/bushings noi ball/roller
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings