Buy REP3ML3FS210 Bearing Ball Rod En part by Timken Corporation

Part Number: REP3ML3FS210

Manufacturer: timken corporation

NSN: 3110-00-690-7297

NIIN: 006907297

Item Name : bearing ball rod en

CAGE Code: 21335

FSC: 3110 Bearings Antifriction Unmounted

INC Code: 00049

Country: USA

NCB Code: 00

FSG: 31 Bearings

We've received your request for REP3ML3FS210 (described as Bearing Ball Rod En), manufactured by Timken Corporation with CAGE code 21335. This part is registered under NSN 3110-00-690-7297, classified in FSG 31 Bearings / FSC 3110 Bearings Antifriction Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 00-690-7297, NCB code 00 (origin: USA), and INC 00049. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your REP3ML3FS210 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for REP3ML3FS210

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part REP3ML3FS210, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number REP3ML3FS210 with NSN 3110-00-690-7297, 3110006907297

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-690-7297 Item PartTypeName: BEARING,BALL,ROD END	3110	006907297	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MS21151-1G	6	2	2

Characteristics Data of NSN 3110-00-690-7297, 3110006907297

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAZE	SHANK DIAMETER	0.1900 INCHES NOMINAL
AAZF	SHANK STYLE	EXTERNALLY THREADED
ABHP	OVERALL LENGTH	1.7660 INCHES NOMINAL
ABXV	BORE DIAMETER	0.1900 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.7810 INCHES NOMINAL
AGGY	SHANK THREAD LENGTH	0.7500 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.3280 INCHES NOMINAL
AGVU	INNER RING WIDTH	0.4370 INCHES NOMINAL
AGXH	LENGTH FROM BORE CENTER TO SHANK END	1.3750 INCHES NOMINAL
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
CMLP	THREAD QUANTITY PER INCH	32
CQJX	NOMINAL THREAD SIZE	0.190 INCHES
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	RUBBER SYNTHETIC SEAL
MATT	MATERIAL	STEEL BALL
MATT	MATERIAL	STEEL INNER RING
MATT	MATERIAL	STEEL OUTER RING
MATT	MATERIAL	STEEL SHAFT
SFTT	SURFACE TREATMENT	CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
STYL	STYLE DESIGNATOR	DOUBLE ROW,STAGGERED,BALL
THSD	THREAD SERIES DESIGNATOR	UNF
AAJF	THREAD DIRECTION	LEFT-HAND

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482800080 (NAICS 332991)	Other ball or roller bearings, including combined ball/roller bearings, nesoi
SITC : 74680	Ball or roller bearings (including combined ball/roller bearings), n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	114820 - Bearings/bushings noi ball/roller
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings