Buy SBSH20W38PP Bearing Plain Self part by Timken Corporation

Part Number: SBSH20W38PP

Manufacturer: timken corporation

NSN: 3120-01-195-0310

NIIN: 011950310

Item Name : bearing plain self

CAGE Code: 21335

FSC: 3120 Bearings Plain Unmounted

INC Code: 13208

Country: USA

NCB Code: 01

FSG: 31 Bearings

We've received your request for SBSH20W38PP (described as Bearing Plain Self), manufactured by Timken Corporation with CAGE code 21335. This part is registered under NSN 3120-01-195-0310, classified in FSG 31 Bearings / FSC 3120 Bearings Plain Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 01-195-0310, NCB code 01 (origin: USA), and INC 13208. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SBSH20W38PP requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SBSH20W38PP

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part SBSH20W38PP, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SBSH20W38PP with NSN 3120-01-195-0310, 3120011950310

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-195-0310 Item PartTypeName: BEARING,PLAIN,SELF-ALIGNING	3120	011950310	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
ADW10VN	5	1	5

Characteristics Data of NSN 3120-01-195-0310, 3120011950310

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
AGGF	OUTER MEMBER OUTSIDE DIAMETER	1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM
AGGH	OUTER MEMBER WIDTH	0.5620 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM
AGGJ	INNER MEMBER WIDTH	0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
AGKP	STATIC RADIAL LOAD RATING	29000 POUNDS
CQFM	HARDNESS RATING	23.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER
CQFM	HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
FEAT	SPECIAL FEATURES	SEAL,ELASTOMERIC,RETAINED BY METAL RING OR INTEGRAL PART OF EACH SIDE OF OUTER RACE; 4.0 DEG MISALIGHNMENT EACH SIDE
MATT	MATERIAL	PLASTIC TETRAFLUOROETHYLENE RACE LINER
MATT	MATERIAL	STEEL COMP 440C INNER MEMBER
MATT	MATERIAL	STEEL COMP 630 OR STEEL COMP XM-12 OUTER RACE MEMBER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5659 ASSN STD 2ND MATERIAL RESPONSE OUTER RACE MEMBER
STYL	STYLE DESIGNATOR	WITH INSERT AND/OR LINER WITH STAKING GROOVE
ZZZK	SPECIFICATION/STANDARD DATA	43999-LE131-0022 MANUFACTURERS SPECIFICATION CONTROL

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482300040 (NAICS 332991)	Spherical roller bearings, single row
SITC : 74630	Spherical roller bearings

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Sf9---n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	114850 - Bearing/bushing o/t ball/roller i/s
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings