Buy REP5MS7FS464 Bearing Ball Rod En part by Timken Corporation

Name: Part Number REP5MS7FS464 - Bearing Ball Rod En
Brand: Timken Corporation
SKU: rep5ms7fs464
Availability: InStock
Rating: 4.6 (226 reviews)

Part Number: REP5MS7FS464

Manufacturer: timken corporation

NSN: 3110-01-126-1294

NIIN: 011261294

Item Name : bearing ball rod en

CAGE Code: 21335

INC Code: 00049

Country: USA

NCB Code: 01

We've received your request for REP5MS7FS464 (described as Bearing Ball Rod En), manufactured by Timken Corporation with CAGE code 21335. This part is registered under NSN 3110-01-126-1294, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-126-1294, NCB code 01 (origin: USA), and INC 00049. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your REP5MS7FS464 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for REP5MS7FS464

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part REP5MS7FS464, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number REP5MS7FS464 with NSN 3110-01-126-1294, 3110011261294

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-126-1294 Item PartTypeName: BEARING,BALL,ROD END	3110	011261294	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
AS21151	6	1	3

Characteristics Data of NSN 3110-01-126-1294, 3110011261294

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AAZE	SHANK DIAMETER	0.4375 INCHES NOMINAL
AAZF	SHANK STYLE	EXTERNALLY THREADED
ABHP	OVERALL LENGTH	3.0630 INCHES NOMINAL
ABXV	BORE DIAMETER	0.3122 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM
AGGY	SHANK THREAD LENGTH	1.5320 INCHES MINIMUM AND 1.5940 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.6460 INCHES MINIMUM AND 0.6660 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.8650 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM
AGXH	LENGTH FROM BORE CENTER TO SHANK END	2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
CMLP	THREAD QUANTITY PER INCH	20
CQJX	NOMINAL THREAD SIZE	0.438 INCHES
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	80 PCT FULL OF SPECIFIED LUBRICANT; STANDARD NAS 513 KEYWAY IN SHANK
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL
MATT	MATERIAL	STEEL COMP 302 RETAINER
MATT	MATERIAL	STEEL COMP 4130 OR STEEL COMP 8620 OUTER RING
MATT	MATERIAL	STEEL COMP 4130 OR STEEL COMP 8620 ROD END BODY
MATT	MATERIAL	STEEL COMP E52100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE ROD END BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
SFTT	SURFACE TREATMENT	CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
STYL	STYLE DESIGNATOR	DOUBLE ROW,STAGGERED,BALL
THSD	THREAD SERIES DESIGNATOR	UNJF

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482800080 (NAICS 332991)	Other ball or roller bearings, including combined ball/roller bearings, nesoi
SITC : 74680	Ball or roller bearings (including combined ball/roller bearings), n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Sf9---v
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	114820 - Bearings/bushings noi ball/roller
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings