Buy 1013864-00 Hose Assembly Nonme part by Tld Ace Corporation

Part Number:  1013864-00
Alternate P/N:  101386400
Manufacturer:  tld ace corporation
NIIN:  014252130
Item Name :  hose assembly nonme
CAGE Code:  00365
INC Code:  20311
Country:  USA
NCB Code:  01
FSG:  47 Pipe Tubing Hose and Fittings

We've received your request for 1013864-00 (described as Hose Assembly Nonme), manufactured by Tld Ace Corporation with CAGE code 00365. This part is registered under NSN 4720-01-425-2130, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4720 Hose and Tubing Flexible. Our verification process will confirm traceability through supporting identifiers including NIIN 01-425-2130, NCB code 01 (origin: USA), and INC 20311. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1013864-00 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1013864-00

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 1013864-00, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 1013864-00 with NSN 4720-01-425-2130, 4720014252130

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-425-2130

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200142521300N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
1013864-0029D

Characteristics Data of NSN 4720-01-425-2130, 4720014252130

MRCCriteriaCharacteristic
CRZY(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITYNOT INCLUDED
FEATSPECIAL FEATURESPOLYESTER HELIX WIRE
CQGH(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIALCOMPLETE FITTING STEEL
CQBB(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
CQBG(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITYNOT INCLUDED
ADJM(NON-CORE DATA) INNER CONVEYING TUBE MATERIALRUBBER, NITRILE
THSDTHREAD SERIES DESIGNATORUN 1ST END NPT 2ND END
CRWLINSIDE SURFACE CONDITIONSMOOTH
CBBLFEATURES PROVIDEDREUSABLE END FITTINGS
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END RIGHT-HAND 2ND END
CRBL(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIALCOMPLETE FITTING STEEL
CQGMMAXIMUM OPERATING PRESSURE300.0 POUNDS PER SQUARE INCH
ADJSEXTERIOR COLORBLUE
CRJMOUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND HEAT RESISTANT
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END
AWLSCONNECTION TYPETHREADED EXTERNAL PIPE 2ND END
CQJXNOMINAL THREAD SIZE1.875 INCHES 1ST END
CQRBSEAT ANGLE37.0 DEGREES 1ST END
AARXINSIDE DIAMETER1.500 INCHES NOMINAL
ABJHTEMP RATING-20.0 DEG FAHRENHEIT AND 180.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKVOUTSIDE DIAMETER2.000 INCHES NOMINAL
ACKHMINIMUM INSIDE BENDING RADIUS6.000 INCHES
AGAVEND ITEM IDENTIFICATION4130-01-381-6650; SUPPORT EQUIPMENT, C-135 AIRCRAFT
AHNCCONNECTION STYLESWIVEL NUT FLARE 1ST END
CMLPTHREAD QUANTITY PER INCH12 1ST END
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER HELIX WIRE COIL AND OUTER LAYER MOLDED RUBBER, NITRILE
CRXXMEASURING METHOD AND LENGTH18.000 INCHES NOMINAL OVERALL
AAJDTHREAD CLASS3B 1ST END

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL -------
Quantity per pack 1
Repariability If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 051420 - Conduits, o/t earthen: pipe fittings
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 736 - Plumbing supplies

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top