Buy TI1011-120 Insert Screw Thread part by Torkon Fastener Corp

Part Number:  TI1011-120
Alternate P/N:  TI1011120
Manufacturer:  torkon fastener corp
NIIN:  010049799
Item Name :  insert screw thread
CAGE Code:  26304
INC Code:  11444
Country:  USA
NCB Code:  01

We've received your request for TI1011-120 (described as Insert Screw Thread), manufactured by Torkon Fastener Corp with CAGE code 26304. This part is registered under NSN 5325-01-004-9799, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-004-9799, NCB code 01 (origin: USA), and INC 11444. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your TI1011-120 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TI1011-120

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part TI1011-120, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number TI1011-120 with NSN 5325-01-004-9799, 5325010049799

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5325-01-004-9799

Item PartTypeName:

INSERT,SCREW THREAD

5325010049799N
CIICHCCESDPMICCriticalityENAC
A0
Part NumberISCRNVCRNCCHCCMSDSSADC
M45932-2-120222

Characteristics Data of NSN 5325-01-004-9799, 5325010049799

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3B
ABRYLENGTH0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM
BZGJINSERT SIZE0.375-24 UNF 3A
CBBLFEATURES PROVIDEDINDIVIDUALLY KEYED
CMLPTHREAD QUANTITY PER INCH18
CQJXNOMINAL THREAD SIZE0.312 INCHES
FEATSPECIAL FEATURESSOLID FILM LUBRICANT COATING,MIL-L-8937
MATTMATERIALSTEEL COMP 303 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLSTYLE DESIGNATORPLAIN
THSDTHREAD SERIES DESIGNATORUNJC

Schedule B & Trade

End Use : 12640 Finished textile supplies
Schedule B : 9606100000 (NAICS 339993) Press-fasteners, snap-fasteners & press-studs & parts therefor
SITC : 89983 Press-fasteners, snap-fasteners and press-studs and parts therefor; buttons

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: M - 85.0
NMFC: 139820 - Nickel bolts/nails/nuts/rivets etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 713 - Metal hardware

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top