Buy TTI-13-784 Reactor part by Transformer Technicians Inc

Part Number:  TTI-13-784
Alternate P/N:  TTI13784
Manufacturer:  transformer technicians inc
NIIN:  013471848
Item Name :  reactor
CAGE Code:  96253
INC Code:  00724
Country:  USA
NCB Code:  01

We've received your request for TTI-13-784 (described as Reactor), manufactured by Transformer Technicians Inc with CAGE code 96253. This part is registered under NSN 5950-01-347-1848, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-347-1848, NCB code 01 (origin: USA), and INC 00724. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your TTI-13-784 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TTI-13-784

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part TTI-13-784, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number TTI-13-784 with NSN 5950-01-347-1848, 5950013471848

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-01-347-1848

Item PartTypeName:

REACTOR

59500134718480P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
5905465523

Characteristics Data of NSN 5950-01-347-1848, 5950013471848

MRCCriteriaCharacteristic
ABTBMOUNTING HOLE DIAMETER0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM SINGLE GROUP
ACYVINDUCTANCE RATING9.70 MICROHENRIES MINIMUM AND 11.70 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING
AEHZMAXIMUM OPERATING TEMP140.0 DEG CELSIUS
AKNAINCLOSURE TYPEFULLY INCLOSED
BKPLRATING METHODELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
TTQYTERMINAL TYPE AND QUANTITY2 WIRE LEAD
CBBLFEATURES PROVIDEDCOLOR CODED LEAD
CRBZWINDING OPERATING CURRENT5.0 AMPERES AC NOMINAL SINGLE COMPONENT SINGLE WINDING
CRGSDC RESISTANCE RATING IN OHMS0.022 SINGLE COMPONENT SINGLE WINDING
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHYTURN QUANTITY12 SINGLE COMPONENT SINGLE PRIMARY
ACYFINDUCTANCE TYPEFIXED
ACZBFREQUENCY RATING1.0 KILOHERTZ NOMINAL SINGLE COMPONENT
ADAQBODY LENGTH0.300 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.650 INCHES MAXIMUM
AKDXWINDING QUANTITY1 SINGLE COMPONENT
AKPVMOUNTING FACILITY QUANTITY1 SINGLE GROUP
AXGYMOUNTING METHODUNTHREADED HOLE SINGLE GROUP
CQPZWINDING CONDUCTOR SIZE0.02535 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING
TESTTEST DATA DOCUMENT99167-5905465 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504900020 (NAICS 335311) Transformer parts
SITC : 77129 Parts of electric power machinery (other than rotating electric power generating machinery and equipment), and parts thereof

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top