Buy 116382 Transformer Power part by Transistor Devices Inc

Part Number:  116382
Manufacturer:  transistor devices inc
NIIN:  013697573
Item Name :  transformer power
CAGE Code:  09004
INC Code:  32496
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 116382 (described as Transformer Power), manufactured by Transistor Devices Inc with CAGE code 09004. This part is registered under NSN 5950-01-369-7573, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-369-7573, NCB code 01 (origin: USA), and INC 32496. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 116382 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 116382

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 116382, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 116382 with NSN 5950-01-369-7573, 5950013697573

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-01-369-7573

Item PartTypeName:

TRANSFORMER,POWER

59500136975730P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
116382521

Characteristics Data of NSN 5950-01-369-7573, 5950013697573

MRCCriteriaCharacteristic
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH4.000 INCHES NOMINAL ALL MOUNTING FACILITIES ALL CENTER GROUPINGS
ACZBFREQUENCY RATING60.0 HERTZ NOMINAL ALL COMPONENTS
ADAQBODY LENGTH4.500 INCHES NOMINAL
ADATBODY WIDTH4.500 INCHES NOMINAL
AEHZMAXIMUM OPERATING TEMP75.0 DEG CELSIUS
AKPVMOUNTING FACILITY QUANTITY4 ALL GROUPINGS
AXGYMOUNTING METHODUNTHREADED HOLE ALL GROUPINGS
TESTTEST DATA DOCUMENT09004-116382 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY4 WIRE LEAD
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL ALL MOUNTING FACILITIES ALL CENTER GROUPINGS
ABTBMOUNTING HOLE DIAMETER0.187 INCHES MINIMUM SINGLE GROUP AND 0.196 INCHES MAXIMUM SINGLE GROUP
ACZCINPUT-OUTPUT PHASE RELATIONSHIPSINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
ADAUBODY HEIGHT1.750 INCHES MAXIMUM
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS4.000 INCHES NOMINAL ALL MOUNTING FACILITIES ALL CENTER GROUPINGS
AKNAINCLOSURE TYPEFULLY INCLOSED
BPLCWINDING FUNCTION AND QUANTITY1 PRIMARY SINGLE COMPONENT AND 1 SECONDARY SINGLE COMPONENT
CRBZWINDING OPERATING CURRENT10.0 MILLIAMPERES AC MAXIMUM SINGLE COMPONENT SINGLE SECONDARY
ZZZKSPECIFICATION/STANDARD DATA09004-116382 MANUFACTURERS SOURCE CONTROL

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top