Buy 1212 Meter Special Scale part by Tremetrics Inc

Part Number:  1212
Manufacturer:  tremetrics inc
NIIN:  009746175
Item Name :  meter special scale
CAGE Code:  63409
INC Code:  61955
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 1212 (described as Meter Special Scale), manufactured by Tremetrics Inc with CAGE code 63409. This part is registered under NSN 6625-00-974-6175, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-974-6175, NCB code 00 (origin: USA), and INC 61955. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1212 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1212

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 1212, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-974-6175, 6625009746175

MRCCriteriaCharacteristic
ADAGMOUNTING STUD LENGTH0.530 INCHES NOMINAL
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.320 INCHES NOMINAL
AMQYINSTALLATION DESIGNPANEL
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS1500.0
CTQLMOVEMENT SUSPENSION METHODJEWEL PIVOT BASE
AKYNFURNISHED ITEMS AND QUANTITYHEX NUT 6; WASHER 6
ABKWOVERALL HEIGHT1.760 INCHES NOMINAL
ABMKOVERALL WIDTH1.760 INCHES NOMINAL
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1.320 INCHES NOMINAL
ZZZVIII FSC APPLICATION DATATEST SET,ELECTRONIC EQUIPMENT
AQECMOVEMENT TYPEMOVING COIL, PERMANENT MAGNET
APSWMETER BODY DIAMETER BEHIND MOUNTING FLANGE1.500 INCHES NOMINAL
ABHPOVERALL LENGTH1.830 INCHES NOMINAL
MARKSPECIAL MARKINGSSCALE MARKED CARRIER LEVEL
ANRLMOUNTING ARRANGEMENT STYLEFOUR HOLE/STUD RECTANGULAR/SQUARE
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
APSN(NON-CORE DATA) PANEL FOR WHICH DESIGNEDNONMAGNETIC
AMKDINDICATOR TYPEDIAL W/POINTER
NHCFNUCLEAR HARDNESS CRITICAL FEATURENONHARDENED
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY2 THREADED STUD
STYLSTYLE DESIGNATORRECTANGULAR FLUSH MTG
APSTMETER DEPTH BEHIND MOUNTING FLANGE1.420 INCHES NOMINAL
APPNACCURACY IN PERCENT-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 136740 - Meters elec/parts
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top