Buy 593707 Bracket Angle part by Triple A Spring Limited

Part Number: 593707

Manufacturer: triple a spring limited

NSN: 5340-00-079-0743

NIIN: 000790743

Item Name : bracket angle

CAGE Code: 27068

FSC: 5340 Hardware Commercial

INC Code: 16900

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 593707 (described as Bracket Angle), manufactured by Triple A Spring Limited with CAGE code 27068. This part is registered under NSN 5340-00-079-0743, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 00-079-0743, NCB code 00 (origin: USA), and INC 16900. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 593707 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 593707

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 593707, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 593707 with NSN 5340-00-079-0743, 5340000790743

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-079-0743 Item PartTypeName: BRACKET,ANGLE	5340	000790743	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
593707	2	2	3

Characteristics Data of NSN 5340-00-079-0743, 5340000790743

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.750 INCHES MINIMUM AND 0.790 INCHES MAXIMUM
ADLL	SECOND LEG LENGTH	1.150 INCHES MINIMUM AND 1.190 INCHES MAXIMUM
AHLF	SECOND LEG WIDTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
AHLK	FIRST LEG HOLE DIAMETER	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
AHPW	FIRST LEG THICKNESS	0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHPX	SECOND LEG THICKNESS	0.056 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AHQN	FIRST LEG WIDTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
AJFP	FIRST LEG END RADIUS	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
AJFQ	SECOND LEG END RADIUS	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
AJZU	FIRST LEG STYLE	END RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
AKBU	SECOND LEG STYLE	END RADIUS
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
MATT	MATERIAL	STEEL COMP 4130
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CADMIUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	ANGLE

Schedule B & Trade

End Use : 41050	Cell phones and other household goods, n.E.C.
Schedule B : 8302500000 (NAICS 337127)	Hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal
SITC : 69919	Mountings, fittings and similar articles, n.E.S., of base metal; hat racks and pegs, brackets, etc., of base metal; base metal automatic door closures

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	095190 - Hardware, noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware