Buy 3005 0300 1 Adapter Connector part by Trompeter Electronics Inc

Part Number: 3005 0300 1

Manufacturer: trompeter electronics inc

NSN: 5935-01-226-1988

NIIN: 012261988

Item Name : adapter connector

CAGE Code: 14949

FSC: 5935 Connectors Electrical

INC Code: 15091

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 3005 0300 1 (described as Adapter Connector), manufactured by Trompeter Electronics Inc with CAGE code 14949. This part is registered under NSN 5935-01-226-1988, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-226-1988, NCB code 01 (origin: USA), and INC 15091. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 3005 0300 1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3005 0300 1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 3005 0300 1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 3005 0300 1 with NSN 5935-01-226-1988, 5935012261988

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5935-01-226-1988 Item PartTypeName: ADAPTER,CONNECTOR	5935	012261988	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
3005-0300-1	2	9	5

Characteristics Data of NSN 5935-01-226-1988, 5935012261988

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AAQL	BODY STYLE	STRAIGHT SHAPE,EXTERNAL/INTERNAL COUPLING
ABHP	OVERALL LENGTH	1.510 INCHES NOMINAL
ADAV	OVERALL DIAMETER	0.580 INCHES NOMINAL
ADZC	ENVIRONMENTAL PROTECTION	FUNGUS RESISTANT AND HUMIDITY RESISTANT AND MOISTURE RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT
AFQR	THREADED DEVICE TYPE	COUPLING FACILITY
AFQW	MATING END QUANTITY	2
AFQX	CONTACT POSITION ARRANGEMENT STYLE	NONSTD 1ST MATING END
AFQX	CONTACT POSITION ARRANGEMENT STYLE	SMA 2ND MATING END
AFQZ	CONTACT REMOVABILITY	REMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
AFRT	SHELL TYPE	SOLID
AFRV	CONNECTOR LOCKING METHOD	BAYONET LATCH AND EXTERNALLY THREADED SHELL
AGAV	END ITEM IDENTIFICATION	5865-01-151-9926
CMLP	THREAD QUANTITY PER INCH	36
CQJX	NOMINAL THREAD SIZE	0.250 INCHES
CQTZ	CONTACT MATERIAL	COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CQYH	CONTACT SURFACE TREATMENT	GOLD ALL MATING ENDS SINGLE CONTACT GROUPING
CQZG	INSERT MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE ALL MATING ENDS
CRBJ	CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CSGF	CONTACT MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE 1ST MATING END SINGLE CONTACT GROUPING
CSGF	CONTACT MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE 2ND MATING END SINGLE CONTACT GROUPING
CSPT	SHELL MATERIAL	STEEL AND COPPER ALLOY
CSWM	SHELL SURFACE TREATMENT	NICKEL AND COPPER
CTBC	SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-N-290 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-14550 MIL SPEC 2ND TREATMENT RESPONSE
CTHH	SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-626 FED SPEC 1ST MATERIAL RESPONSE AND ASTM-A-484 ASSN STD 2ND MATERIAL RESPONSE
CTKL	INSERT MATERIAL DOCUMENT AND CLASSIFICATION	L-P-403 FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS
CXCG	INCLUDED CONTACT QUANTITY	1 1ST MATING END SINGLE CONTACT GROUPING
CXCG	INCLUDED CONTACT QUANTITY	1 2ND MATING END SINGLE CONTACT GROUPING
PMLC	PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PMWT	PRECIOUS MATERIAL AND WEIGHT	0.010 GOLD GRAINS,TROY
PRMT	PRECIOUS MATERIAL	GOLD
THSD	THREAD SERIES DESIGNATOR	UNS

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8548900100 (NAICS 335999)	Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813	Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	G - Item contains gold.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Q2200x-
Quantity per pack	1
Repariability	Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	061680 - Elec wiring plugs etc
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small