Buy BJ54FL-5 Connector Receptacl part by Trompeter Electronics Inc

Part Number:  BJ54FL-5
Alternate P/N:  BJ54FL5
Manufacturer:  trompeter electronics inc
NIIN:  013916246
Item Name :  connector receptacl
CAGE Code:  14949
INC Code:  15093
Country:  USA
NCB Code:  01

We've received your request for BJ54FL-5 (described as Connector Receptacl), manufactured by Trompeter Electronics Inc with CAGE code 14949. This part is registered under NSN 5935-01-391-6246, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-391-6246, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your BJ54FL-5 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BJ54FL-5

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part BJ54FL-5, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number BJ54FL-5 with NSN 5935-01-391-6246, 5935013916246

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-391-6246

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350139162460PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
6011881-002595

Characteristics Data of NSN 5935-01-391-6246, 5935013916246

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
ADAVOVERALL DIAMETER0.687 INCHES MINIMUM
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.550 INCHES MINIMUM AND 0.610 INCHES MAXIMUM
AFQQMOUNTING FACILITY THICKNESS0.116 INCHES MAXIMUM
AFQWMATING END QUANTITY1
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALCOPPER ALLOY
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-N-290 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-14550 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-C-26074 MIL SPEC 3RD TREATMENT RESPONSE
THSDTHREAD SERIES DESIGNATORUN
AAJDTHREAD CLASS2A
ABHPOVERALL LENGTH0.870 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT
AFQXCONTACT POSITION ARRANGEMENT STYLENONSTD SINGLE MATING END
AFRVCONNECTOR LOCKING METHODBAYONET PIN
CMLPTHREAD QUANTITY PER INCH28
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CSWMSHELL SURFACE TREATMENTNICKEL AND COPPER AND NICKEL
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRMTPRECIOUS MATERIALGOLD
AFQRTHREADED DEVICE TYPEMOUNTING BUSHING
CQJXNOMINAL THREAD SIZE0.5625 INCHES
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
AAJFTHREAD DIRECTIONRIGHT-HAND
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top