Buy 10065935 Bracket Angle part by U S Army Aviation And Missile

Part Number: 10065935

Manufacturer: u s army aviation and missile

NSN: 5340-00-848-4560

NIIN: 008484560

Item Name : bracket angle

CAGE Code: 18876

FSC: 5340 Hardware Commercial

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 10065935 (described as Bracket Angle), manufactured by U S Army Aviation And Missile with CAGE code 18876. This part is registered under NSN 5340-00-848-4560, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 00-848-4560, NCB code 00 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 10065935 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 10065935

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 10065935, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 10065935 with NSN 5340-00-848-4560, 5340008484560

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-848-4560 Item PartTypeName: BRACKET,ANGLE	5340	008484560	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10065935	2	2	3

Characteristics Data of NSN 5340-00-848-4560, 5340008484560

MRC	Criteria	Characteristic
ADLL	SECOND LEG LENGTH	1.250 INCHES NOMINAL
AHLN	SECOND LEG HOLE DIAMETER	0.253 INCHES MINIMUM AND 0.262 INCHES MAXIMUM
AHLR	SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH	3.125 INCHES NOMINAL
AHLS	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	0.312 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.500 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM
AHPX	SECOND LEG THICKNESS	0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM
AHQX	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	0.438 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.500 INCHES NOMINAL
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	THREE HOLES
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
MATT	MATERIAL	ALUMINUM ALLOY 6063
STYL	STYLE DESIGNATOR	ANGLE
ADLK	FIRST LEG LENGTH	1.125 INCHES NOMINAL
AHLF	SECOND LEG WIDTH	4.125 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.343 INCHES NOMINAL
AHLT	SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	1.562 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.438 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	4.125 INCHES NOMINAL
AHQP	FIRST LEG CORNER RADIUS	0.375 INCHES NOMINAL
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	3.125 INCHES NOMINAL
AHQW	FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH	0.156 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.750 INCHES NOMINAL
AJZU	FIRST LEG STYLE	CORNER RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
AKBU	SECOND LEG STYLE	SQUARE
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	SLOT IN FIRST LEG 3.125 IN. BY 0.218 IN. W