Buy 9065866 Spacer Plate part by U S Army Aviation And Missile

Part Number: 9065866

Manufacturer: u s army aviation and missile

NSN: 5365-00-660-1394

NIIN: 006601394

Item Name : spacer plate

CAGE Code: 18876

FSC: 5365 Bushings Rings Shims and Spacers

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 9065866 (described as Spacer Plate), manufactured by U S Army Aviation And Missile with CAGE code 18876. This part is registered under NSN 5365-00-660-1394, classified in FSG 53 Hardware and Abrasives / FSC 5365 Bushings Rings Shims and Spacers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-660-1394, NCB code 00 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 9065866 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 9065866

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 9065866, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 9065866 with NSN 5365-00-660-1394, 5365006601394

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-00-660-1394 Item PartTypeName: SPACER,PLATE	5365	006601394		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				P
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
9065866	6	2	3

Characteristics Data of NSN 5365-00-660-1394, 5365006601394

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.170 INCHES MINIMUM AND 0.173 INCHES MAXIMUM
ABHP	OVERALL LENGTH	3.000 INCHES NOMINAL
ABMK	OVERALL WIDTH	1.625 INCHES NOMINAL
ADPQ	INSIDE CORNER RADIUS	0.031 INCHES NOMINAL
ADPW	OUTSIDE CORNER RADIUS	0.063 INCHES NOMINAL
ADUE	APERTURE WIDTH	0.400 INCHES MINIMUM AND 0.401 INCHES MAXIMUM
ADUF	APERTURE LENGTH	0.899 INCHES MINIMUM AND 0.901 INCHES MAXIMUM
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.302 INCHES MINIMUM AND 1.304 INCHES MAXIMUM
ADVD	OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.191 INCHES NOMINAL
ADVE	OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.1705 INCHES NOMINAL
AECS	BOLT HOLE QUANTITY	6
MATT	MATERIAL	COPPER ALLOY 268
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-613,1/2H FED SPEC SINGLE MATERIAL RESPONSE
PMLC	PRECIOUS MATERIAL AND LOCATION	OVERALL SURFACE RHODIUM
PRMT	PRECIOUS MATERIAL	RHODIUM
SFTT	SURFACE TREATMENT	RHODIUM
ZZZV	FSC APPLICATION DATA	TEST SET GUIDED MISSILE