Buy EGD-0843 Bracket Angle part by U S Army Aviation And Missile

Part Number:  EGD-0843
Alternate P/N:  EGD0843
NIIN:  012593692
Item Name :  bracket angle
CAGE Code:  81996
Country:  USA
NCB Code:  01

We've received your request for EGD-0843 (described as Bracket Angle), manufactured by U S Army Aviation And Missile with CAGE code 81996. This part is registered under NSN 5340-01-259-3692, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-259-3692, NCB code 01 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your EGD-0843 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for EGD-0843

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part EGD-0843, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number EGD-0843 with NSN 5340-01-259-3692, 5340012593692

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-01-259-3692

Item PartTypeName:

BRACKET,ANGLE

53400125936920P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
EGD-0843523

Characteristics Data of NSN 5340-01-259-3692, 5340012593692

MRCCriteriaCharacteristic
ACHYMOUNTING HOLE TYPEPLAIN
ADLKFIRST LEG LENGTH0.750 INCHES NOMINAL
ADLLSECOND LEG LENGTH1.250 INCHES NOMINAL
AHLFSECOND LEG WIDTH1.625 INCHES NOMINAL
AHLHSECOND LEG END WIDTH0.875 INCHES NOMINAL
AHLKFIRST LEG HOLE DIAMETER0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
AHLNSECOND LEG HOLE DIAMETER0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
AHLPSECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH0.375 INCHES NOMINAL
AHLSSECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH0.250 INCHES NOMINAL
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES NOMINAL
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.219 INCHES NOMINAL
AHPWFIRST LEG THICKNESS0.090 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.090 INCHES NOMINAL
AHQNFIRST LEG WIDTH1.625 INCHES NOMINAL
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES NOMINAL
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.300 INCHES NOMINAL
AJZUFIRST LEG STYLESQUARE
AKAUFIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
AKBUSECOND LEG STYLEANGLE
AKCUSECOND LEG HOLE ARRANGEMENT STYLETWO HOLES
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL
FEATSPECIAL FEATURESCOLOR BLACK;1ST LEG HAS ADDITIONAL HOLE 0.097 IN. MIN AND 0.103 IN. MAX DIA
MATTMATERIALALUMINUM ALLOY 6061
SFTTSURFACE TREATMENTPAINT
STYLSTYLE DESIGNATORANGLE

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top