Buy SMI7M2SL Connector Receptacl part by U S Components Inc

Part Number:  SMI7M2SL
Manufacturer:  u s components inc
NIIN:  002422094
Item Name :  connector receptacl
CAGE Code:  97954
INC Code:  15093
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for SMI7M2SL (described as Connector Receptacl), manufactured by U S Components Inc with CAGE code 97954. This part is registered under NSN 5935-00-242-2094, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-242-2094, NCB code 00 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SMI7M2SL requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SMI7M2SL

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part SMI7M2SL, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SMI7M2SL with NSN 5935-00-242-2094, 5935002422094

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-242-2094

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350024220940PA
CIICHCCESDPMICCriticalityENAC
UAC
Part NumberISCRNVCRNCCHCCMSDSSADC
1178-510-2223

Characteristics Data of NSN 5935-00-242-2094, 5935002422094

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A AND 2B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE
ABHPOVERALL LENGTH0.875 INCHES NOMINAL
ABKWOVERALL HEIGHT0.547 INCHES NOMINAL
ABMKOVERALL WIDTH0.234 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND VIBRATION RESISTANT
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS0.625 INCHES NOMINAL
AFQRTHREADED DEVICE TYPECOUPLING FACILITY AND MOUNTING STUD
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLE7 SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS7.5 SINGLE MATING END SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS485.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODJACKSCREW
AFRVCONNECTOR LOCKING METHODJACKSCREW-SOCKET
CMLPTHREAD QUANTITY PER INCH48 AND 56
CQJXNOMINAL THREAD SIZE0.099 INCHES AND 0.086 INCHES
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC DIALLYL PHTHALATE SINGLE MATING END
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-S-365 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14F TY GDI-30 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCGINCLUDED CONTACT QUANTITY7 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
FEATSPECIAL FEATURESJACKSCREW TYPE-FEMALE AND LOCATION-RIGHT HANDANDJACKSCREW TYPE-MALE AND LOCATION-LEFT HAND
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE GOLD AND CONTACT SURFACE SILVER
PMWTPRECIOUS MATERIAL AND WEIGHT0.007 GOLD GRAINS,TROY AND 0.007 SILVER GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD AND SILVER
THSDTHREAD SERIES DESIGNATORUNC

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top