Buy 15-0041 Attenuator Variable part by United Recording Electronics

Part Number:  15-0041
Alternate P/N:  150041
NIIN:  000035728
Item Name :  attenuator variable
CAGE Code:  29455
INC Code:  00838
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 15-0041 (described as Attenuator Variable), manufactured by United Recording Electronics with CAGE code 29455. This part is registered under NSN 5985-00-003-5728, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5985 Antennas Waveguides and Related Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 00-003-5728, NCB code 00 (origin: USA), and INC 00838. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 15-0041 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 15-0041

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 15-0041, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 15-0041 with NSN 5985-00-003-5728, 5985000035728

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-00-003-5728

Item Description:

Attenuator Variable

59850000357280P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
15-0041 95

Characteristics Data of NSN 5985-00-003-5728, 5985000035728

MRCCriteriaCharacteristic
ABPMBODY DIAMETER1.140 INCHES NOMINAL
AJDBPOWER RATING5.0 WATTS AVERAGE
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
ADAQBODY LENGTH1.250 INCHES NOMINAL
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 THREADED BUSHING
CRYYMOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER0.250 INCHES
ABMKOVERALL WIDTH1.445 INCHES NOMINAL
AEBZSCHEMATIC DIAGRAM DESIGNATORBRIDGED "T
CQTQADJUSTMENT DEVICE TYPE AND QUANTITY1 SHAFT
TTQYTERMINAL TYPE AND QUANTITY6 TAB, SOLDER LUG
AAFSAPPLICATION DESIGNAUDIO
AAQLBODY STYLECYLINDRICAL W/SIDE TERMINALS
ABHPOVERALL LENGTH2.000 INCHES NOMINAL
ABWFSCALE LINEARITYLINEAR
ABXDBUSHING LENGTH0.375 INCHES NOMINAL
ABXFSHAFT LENGTH0.750 INCHES NOMINAL
AFGAOPERATING TEMP RANGE55.0 TO 120.0 DEG CELSIUS
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
ASYDOVERALL ATTENUATION RANGE IN DECIBELS+0.0/+12.0
ASYFATTENUATION VARIATION METHODCONTINUOUS
BQNROVERALL ATTENUATION ACCURACY IN DECIBELS-1.00 TO 1.00
CGGKMOUNTING THREAD QUANTITY20 PER INCH
CRSJSHAFT TYPEROUND
CTGGIMPEDANCE RATING IN OHMS600.0 INPUT-OUTPUT

Schedule B & Trade

End Use : 21400 Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220) Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493 Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL -------
Quantity per pack 0
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top