Buy 5037304 Pin,Shoulder,Headless part by Us Army Ardec Rdecom

Part Number: 5037304

Manufacturer: us army ardec rdecom

NSN: 5315-00-503-7304

NIIN: 005037304

Item Name : pin,shoulder,headless

CAGE Code: 19200

FSC: 5315 Nails Keys and Pins

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 5037304 (described as Pin,Shoulder,Headless), manufactured by Us Army Ardec Rdecom with CAGE code 19200. This part is registered under NSN 5315-00-503-7304, classified in FSG 53 Hardware and Abrasives / FSC 5315 Nails Keys and Pins. Our verification process will confirm traceability through supporting identifiers including NIIN 00-503-7304, NCB code 00 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 5037304 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 5037304

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 5037304, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 5037304 with NSN 5315-00-503-7304, 5315005037304

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-00-503-7304 Item PartTypeName: PIN,SHOULDER,HEADLESS	5315	005037304		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
5037304	6	2	3

Characteristics Data of NSN 5315-00-503-7304, 5315005037304

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	OVAL
AAHP	SECOND END STYLE	SQUARE
AATR	SHANK LENGTH	0.650 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
AAVH	SHOULDER DIAMETER	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
AAZE	SHANK DIAMETER	0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
ABHP	OVERALL LENGTH	0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM
CQBB	SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
CQFM	HARDNESS RATING	59.0 ROCKWELL C MINIMUM AND 61.0 ROCKWELL C MAXIMUM OVERALL
CQTR	SECOND SHANK DIAMETER	0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
CRDY	FIRST END LOCATION	SHORT SHANK END
CSKM	FIRST END OUTER RADIUS	0.124 INCHES NOMINAL
CSYM	SURFACE FINISH	16.0 MICROINCHES SHANK END
CSYM	SURFACE FINISH	63.0 MICROINCHES BOTH ENDS
CWAS	SECOND SHANK LENGTH	0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
MATT	MATERIAL	STEEL COMP 1046 OR STEEL COMP 1048 OR STEEL COMP 1050 OR STEEL COMP 1049 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-634 FED SPEC ALL MATERIAL RESPONSES OVERALL
SFTT	SURFACE TREATMENT	PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-16232,TY M,CL 3 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-P-16232,TY Z,CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	SHOULDER