Buy 301-00H50K Resistor Variable W part by Vamistor Corp

Part Number:  301-00H50K
Alternate P/N:  30100H50K
Manufacturer:  vamistor corp
NIIN:  008512402
Item Name :  resistor variable w
CAGE Code:  0EBU2
INC Code:  37406
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 301-00H50K (described as Resistor Variable W), manufactured by Vamistor Corp with CAGE code 0EBU2. This part is registered under NSN 5905-00-851-2402, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-851-2402, NCB code 00 (origin: USA), and INC 37406. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 301-00H50K requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 301-00H50K

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 301-00H50K, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 301-00H50K with NSN 5905-00-851-2402, 5905008512402

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-851-2402

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050085124020NB
CIICHCCESDPMICCriticalityENAC
UBG
Part NumberISCRNVCRNCCHCCMSDSSADC
11602445-1323

Characteristics Data of NSN 5905-00-851-2402, 5905008512402

MRCCriteriaCharacteristic
AAQLBODY STYLERECTANGULAR
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
ABXFSHAFT LENGTH0.030 INCHES MAXIMUM
ADAQBODY LENGTH0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
ADATBODY WIDTH0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
ADAUBODY HEIGHT0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,SLOTTED
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION9000.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE5.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES
AFJNFRAGILITY FACTORMODERATELY RUGGED
AKPVMOUNTING FACILITY QUANTITY2
APXHTERMINAL LOCATIONLEFT ADJACENT SIDE TWO ROWS
AXGYMOUNTING METHODUNTHREADED HOLE
AAPNSECTION QUANTITY1
ABTBMOUNTING HOLE DIAMETER0.075 INCHES NOMINAL
AEDZSHAFT BEARING TYPESLEEVE
AEFDACTUATOR TYPESINGLE SHAFT
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CBBLFEATURES PROVIDEDHERMETICALLY SEALED
CQCCELECTRICAL RESISTANCE PER SECTION50.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG9000.0 NOMINAL
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINAL SURFACES GOLD
PRMTPRECIOUS MATERIALGOLD
TTQYTERMINAL TYPE AND QUANTITY3 PIN
CBMECUBIC MEASURE0.054 CUBIC INCHES
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.5 FREE AIR SINGLE SECTION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top