Buy MS21125B409 Screw Close Toleran part by Vereenigde Ingenieursbureaux

Part Number: MS21125B409

Manufacturer: vereenigde ingenieursbureaux

NSN: 5305-01-191-4494

NIIN: 011914494

Item Name : screw close toleran

CAGE Code: H0910

FSC: 5305 Screws

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for MS21125B409 (described as Screw Close Toleran), manufactured by Vereenigde Ingenieursbureaux with CAGE code H0910. This part is registered under NSN 5305-01-191-4494, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 01-191-4494, NCB code 01 (origin: USA), and INC 29294. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS21125B409 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS21125B409

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS21125B409, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS21125B409 with NSN 5305-01-191-4494, 5305011914494

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-191-4494 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	011914494	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
5305PL0783964	5	9	6

Characteristics Data of NSN 5305-01-191-4494, 5305011914494

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.278 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
AASB	FASTENER LENGTH	0.981 INCHES MINIMUM AND 1.001 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT CHAMFER
AASL	HEAD DIAMETER	0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
AASU	HEAD HEIGHT	0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
AAUM	LOCKING FEATURE	DETENT BALL GRIP
AAUR	GRIP DIAMETER	0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	SLOT
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	0.562 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	63000 POUNDS PER SQUARE INCH
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.885 INCHES MINIMUM AND 0.905 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
MATT	MATERIAL	STEEL COMP 631 OR STEEL COMP 302 SPRING
MATT	MATERIAL	STEEL COMP 632 FASTENER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A580 COND. A ASSN STD SINGLE MATERIAL RESPONSE SPRING
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF