AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
+1-714-705-4780 sales@aerospaceexchange.com
QUICK QUOTE HERE
Home   /   Vernitron Corp    /   Part 205 208 103

Buy 205 208 103 Resistor Variable W part by Vernitron Corp

Part Number:  205 208 103
Manufacturer:  vernitron corp
NSN:  5905-00-547-8604
NIIN:  005478604
Item Name :  resistor variable w
CAGE Code:  84048
FSC:  5905 Resistors
INC Code:  37406
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 205 208 103 (described as Resistor Variable W), manufactured by Vernitron Corp with CAGE code 84048. This part is registered under NSN 5905-00-547-8604, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-547-8604, NCB code 00 (origin: USA), and INC 37406. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 205 208 103 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 205 208 103

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload  

How to Begin the Quotation Process

  1. Fill out and submit the form for part 205 208 103, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 205 208 103 with NSN 5905-00-547-8604, 5905005478604

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-547-8604

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050054786040NB
CIICHCCESDPMICCriticalityENAC
UBA0
Part NumberISCRNVCRNCCHCCMSDSSADC
044-1094E1CA

Characteristics Data of NSN 5905-00-547-8604, 5905005478604

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES
AARGRELIABILITY INDICATORESTABLISHED
AARHRELIABILITY FAILURE RATE LEVEL IN PERCENT0.100
ABHPOVERALL LENGTH0.702 INCHES MINIMUM
ABJTTERMINAL LENGTH0.172 INCHES MINIMUM
ABKWOVERALL HEIGHT0.500 INCHES NOMINAL
ABMKOVERALL WIDTH0.205 INCHES NOMINAL
ABTBMOUNTING HOLE DIAMETER0.073 INCHES NOMINAL
ABWVSHAFT DIAMETER0.045 INCHES MAXIMUM
ABXFSHAFT LENGTH0.078 INCHES NOMINAL
ADAQBODY LENGTH0.515 INCHES NOMINAL
ADATBODY WIDTH0.205 INCHES NOMINAL
ADAUBODY HEIGHT0.500 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.520 INCHES NOMINAL
AKPVMOUNTING FACILITY QUANTITY2
APXHTERMINAL LOCATIONREAR END
AXGYMOUNTING METHODUNTHREADED HOLE AND TERMINAL
CQCCELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS SINGLE SECTION
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.75 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
TESTTEST DATA DOCUMENT81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQYTERMINAL TYPE AND QUANTITY3 PIN
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

Find Most Relevant Part No of 205 208 103

  • 205-0
  • Attenuator Fixed
  • Cinch Connectivity Solutions Ltd
  • 205-0-6WDUAL
  • Resistor Variable Nonwire Wound Precision
  • General Dynamics Global Imaging

Recently Viewed Parts

205 208 103

RFQ

419254-1

RFQ

Part 205 208 103 With Different Manufacturers

205-208-103
RFQ

BROWSE BY CATEGORIES

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015
asap_member

Aviation Suppliers Association Member
certified_company

FAA AC 0056B Accredited
as6081_supplier

AS 6081:2012 Certification
esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top