Buy 100-501J Resistor Variable W part by Vernitron Corp

Part Number:  100-501J
Alternate P/N:  100501J
Manufacturer:  vernitron corp
NIIN:  007818802
Item Name :  resistor variable w
CAGE Code:  84048
INC Code:  37406
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 100-501J (described as Resistor Variable W), manufactured by Vernitron Corp with CAGE code 84048. This part is registered under NSN 5905-00-781-8802, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-781-8802, NCB code 00 (origin: USA), and INC 37406. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 100-501J requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 100-501J

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 100-501J, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 100-501J with NSN 5905-00-781-8802, 5905007818802

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-781-8802

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050078188020NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
100-501J325

Characteristics Data of NSN 5905-00-781-8802, 5905007818802

MRCCriteriaCharacteristic
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
FEATSPECIAL FEATURESSCREWDRIVER SLOT PROVIDED FOR ADJUSTMENT
AAQLBODY STYLECYLINDRICAL
ABHPOVERALL LENGTH0.412 INCHES NOMINAL
ABJTTERMINAL LENGTH0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
ADAQBODY LENGTH0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
AEFDACTUATOR TYPEFLUSH DRIVE WITH SLOT-HOLE
APXHTERMINAL LOCATIONREAR END
CQCCELECTRICAL RESISTANCE PER SECTION500.000 OHMS SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER50.0 SINGLE SECTION
TESTTEST DATA DOCUMENT18876-10125246 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQYTERMINAL TYPE AND QUANTITY3 PIN
AAPNSECTION QUANTITY1
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPMBODY DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION320.0 NOMINAL
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
AXGYMOUNTING METHODTERMINAL
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG320.0 NOMINAL

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q22rzx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top