We've received your request for TP21L (described as Capacitor Variable), manufactured by Voltronics Corp with CAGE code 18736. This part is registered under NSN 5910-00-683-8008, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-683-8008, NCB code 00 (origin: USA), and INC 00532. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your TP21L requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-00-683-8008 Item PartTypeName: CAPACITOR,VARIABLE,GLASS DIELECT | 5910 | 006838008 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 922-0480-00 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PISTON |
| ABHP | OVERALL LENGTH | 1.261 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.105 INCHES MAXIMUM SINGLE SHAFT |
| AEBC | TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| AEBF | TEMP COEFFICIENT OF CAPACITANCE RANGE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| AXGR | ADJUSTMENT DEVICE TORQUE | 1.500 INCH-OUNCES MINIMUM AND 6.000 INCH-OUNCES MAXIMUM |
| AXGT | INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 1000.0 GIGOHMS |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SHAFT |
| CTGS | CAPACITANCE DRIFT IN PICOFARADS | 0.04 SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.120 INCHES NOMINAL SINGLE SHAFT |
| ADAQ | BODY LENGTH | 1.156 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 0.250 INCHES NOMINAL |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.000 INCHES NOMINAL |
| AECJ | QUALITY FACTOR AT 25 DEG CELSIUS | 500.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 TERMINAL |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 1.0 TO 19.0 SINGLE SECTION |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | 750.0 DC CONTINUOUS SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 TAB,SOLDER LUG AND 1 WIRE LEAD |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8532290040 (NAICS 334416) | Fixed capacitors, nesoi |
| SITC : 77867 | Fixed capacitors, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | P - 77.5 |
| NMFC: | 061400 - Condensers/parts noi/capacitors |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 723 - Radio parts and equipment, excluding tubes packed separately |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
