Buy TP10 Capacitor Variable part by Voltronics Corp

Part Number:  TP10
Manufacturer:  voltronics corp
NIIN:  009334888
Item Name :  capacitor variable
CAGE Code:  18736
INC Code:  00532
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for TP10 (described as Capacitor Variable), manufactured by Voltronics Corp with CAGE code 18736. This part is registered under NSN 5910-00-933-4888, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-933-4888, NCB code 00 (origin: USA), and INC 00532. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your TP10 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TP10

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part TP10, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number TP10 with NSN 5910-00-933-4888, 5910009334888

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-933-4888

Item PartTypeName:

CAPACITOR,VARIABLE,GLASS DIELECT

59100093348880P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
202-050225

Characteristics Data of NSN 5910-00-933-4888, 5910009334888

MRCCriteriaCharacteristic
AAQLBODY STYLEPISTON
ABHPOVERALL LENGTH0.414 INCHES NOMINAL
ABWVSHAFT DIAMETER0.121 INCHES NOMINAL SINGLE SHAFT
ABXFSHAFT LENGTH0.148 INCHES NOMINAL SINGLE SHAFT
ADAQBODY LENGTH0.266 INCHES NOMINAL
ADAVOVERALL DIAMETER0.312 INCHES MAXIMUM
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.250 INCHES NOMINAL
AEBSCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER0.275 INCHES NOMINAL
AECJQUALITY FACTOR AT 25 DEG CELSIUS500.0
AKNAINCLOSURE TYPEENCAPSULATED
AXGTINSULATION DC RESISTANCE AT 25 DEG CELSIUS1000.0 GIGOHMS
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 TERMINAL
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
CRSJSHAFT TYPEROUND,SLOTTED SINGLE SHAFT
CTGNCAPACITANCE RANGE IN PICOFARADS1.0 TO 10.0 SINGLE SECTION
CTGPNONDERATED VOLTAGE RATING AND TYPE500.0 DC CONTINUOUS SINGLE SECTION
CTGRADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY1 SHAFT
TESTTEST DATA DOCUMENT90073-202-050 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQYTERMINAL TYPE AND QUANTITY4 WIRE LEAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290040 (NAICS 334416) Fixed capacitors, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q22sax-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top