Buy 27WW0619 Worm Shaft part by Volvo Trucks North America Inc

Part Number: 27WW0619

Manufacturer: volvo trucks north america inc

NSN: 3040-00-350-3180

NIIN: 003503180

Item Name : worm shaft

CAGE Code: 62265

FSC: 3040 Miscellaneous Power Transmission Equipment

INC Code: 18249

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

We've received your request for 27WW0619 (described as Worm Shaft), manufactured by Volvo Trucks North America Inc with CAGE code 62265. This part is registered under NSN 3040-00-350-3180, classified in FSG 30 Mechanical Power Transmission Equipment / FSC 3040 Miscellaneous Power Transmission Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 00-350-3180, NCB code 00 (origin: USA), and INC 18249. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 27WW0619 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 27WW0619

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 27WW0619, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 27WW0619 with NSN 3040-00-350-3180, 3040003503180

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-00-350-3180 Item PartTypeName: WORM SHAFT	3040	003503180		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2404	5	2	3

Characteristics Data of NSN 3040-00-350-3180, 3040003503180

MRC	Criteria	Characteristic
AAHN	END SIMILARITY	NOT IDENTICAL
AASA	THREAD LENGTH	0.469 INCHES NOMINAL FIRST END,FIFTH PORTION
ABHP	OVERALL LENGTH	17.188 INCHES NOMINAL
ABRR	KEYWAY WIDTH	0.312 INCHES NOMINAL FIRST END,FIFTH PORTION
AJYP	SCREW THREAD SERIES DESIGNATOR	SAE FIRST END,FIFTH PORTION
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND FIRST END,FIFTH PORTION
BYFR	TEETH HARDNESS RATING	56.3 ROCKWELL C MINIMUM AND 62.5 ROCKWELL C MAXIMUM
CFFB	WORM THREAD QUANTITY	1
CFFC	WORM THREAD LEAD	0.9375 INCHES NOMINAL
CFFD	WORM THREAD DIRECTION	RIGHT-HAND
CFFF	WORM PRESSURE ANGLE IN DEG	27.500
CFFG	WORM HELIX ANGLE	5 DEG 41 MIN
CFFK	WORM OUTSIDE DIAMETER	3.596 INCHES NOMINAL
CFFL	WORM PITCH DIAMETER	3.000 INCHES NOMINAL
CFFM	SHAFT HARDNESS RATING	20.3 ROCKWELL C MINIMUM AND 32.2 ROCKWELL C MAXIMUM
CFFN	WORM THREAD SECTION LENGTH	3.500 INCHES NOMINAL
CFFP	WORM BODY LENGTH	3.500 INCHES NOMINAL
CFFQ	WORM BODY TAPERED BEARING SURFACE END	NOT PROVIDED
CFFW	SHAFT LOCATION	BOTH ENDS OF WORM
CFFX	STRAIGHT UNTHREADED LENGTH	0.344 INCHES NOMINAL FIRST END,FOURTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	1.000 INCHES NOMINAL FIRST END,SECOND PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	1.000 INCHES NOMINAL SECOND END,SECOND PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	1.250 INCHES NOMINAL FIRST END,THIRD PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.813 INCHES NOMINAL SECOND END,THIRD PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	3.188 INCHES NOMINAL FIRST END,FIRST PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	3.188 INCHES NOMINAL SECOND END,FIRST PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.250 INCHES NOMINAL FIRST END,FOURTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.500 INCHES NOMINAL FIRST END,THIRD PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.500 INCHES NOMINAL SECOND END,THIRD PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.575 INCHES NOMINAL FIRST END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.575 INCHES NOMINAL SECOND END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.000 INCHES NOMINAL FIRST END,FIRST PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.000 INCHES NOMINAL SECOND END,FIRST PORTION
CFGC	UNTHREADED SECTION PIN HOLE DIAMETER	0.2970 INCHES NOMINAL BOTH ENDS
MATT	MATERIAL	STEEL COMP 2315
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	SAE 2315 ASSN STD SINGLE MATERIAL RESPONSE
ZZZV	FSC APPLICATION DATA	WINCH,TACTICAL VEHICLE

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8483105000 (NAICS 333613)	Transmission shafts and cranks, except camshafts and crankshafts
SITC : 74810	Transmission shafts (including cam and crank shafts) and cranks

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	M - 85.0
LTL:	M - 85.0
NMFC:	019940 - Auto transmissions r clutches
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	581 - Automobile parts, new