Buy 4808OPT10-OPT20 Calibrator Voltage part by Wavetek U S Inc

Part Number:  4808OPT10-OPT20
Alternate P/N:  4808OPT10OPT20
Manufacturer:  wavetek u s inc
NIIN:  014380945
Item Name :  calibrator voltage
CAGE Code:  23338
INC Code:  21329
Country:  USA
NCB Code:  01
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 4808OPT10-OPT20 (described as Calibrator Voltage), manufactured by Wavetek U S Inc with CAGE code 23338. This part is registered under NSN 6625-01-438-0945, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-438-0945, NCB code 01 (origin: USA), and INC 21329. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4808OPT10-OPT20 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4808OPT10-OPT20

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 4808OPT10-OPT20, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-438-0945, 6625014380945

MRCCriteriaCharacteristic
ACYRDC VOLTAGE RATING1.0 VOLTS MINIMUM AND 1000.0 VOLTS MAXIMUM
RTSEIII RELATIONSHIP TO SIMILAR EQUIPMENTSIMILAR TO WAVETEK 4808 WITH OPTS20, 30 &5200 S/L AS 6625-01-379-0495
ABHPOVERALL LENGTH22.200 INCHES NOMINAL
AGAVIII END ITEM IDENTIFICATIONELEC SYSTEMS TEST SET APQ-180
SR-5DESIGN CONTROL REFERENCE4808OPT10-OPT20
AWJNIII UNPACKAGED UNIT WEIGHT80.000 POUNDS
FAAZPHASESINGLE
ACZBFREQUENCY RATING48.0 HERTZ MINIMUM AND 62.0 HERTZ MAXIMUM
SR-5THE MANUFACTURERS DATA
ABMKOVERALL WIDTH17.900 INCHES NOMINAL
SUPPIII SUPPLEMENTARY FEATURES2 HR WARMUP TIME; OPERATING TEMP 0 TO 50 DEG CEL; STORAGE TEMP MINUS 40 DEG TO PLUS 70 DEG CEL; VACUUM FLOURESCENT DISPLAY; SAFETY ALARM
BDHTCALIBRATION RANGE QUANTITY6
FTLDIII FUNCTIONAL DESCRIPTIONPERFORMS ADJUSTMENTS AND CALIBRATION TO E1429A/B DIGITIZER AND 1270B FREQUENCY RESPONSE ANALYZER
ACYNAC VOLTAGE RATING100.0 VOLTS NOMINAL AND 240.0 VOLTS NOMINAL
SR-5MANUFACTURERS CODE34280
FEATSPECIAL FEATURESDC SOURCE; DESIGNED TO BE SUPPORTED BY WAVETEK 4950 MULTIFUNCTION TRANSFER STANDARD; 8-1/2 DIGIT ACCURACY; TRUE 1 KV AC PERFORMANCE; OPT 10 IS DC VOLTAGE RANGE PORM 190 VDC WITHOUT HIGH VOLTAGE AND PORM 1100 VDC WITH HIGH VOLTAGE; OPT 20 IS AC VOLTAGE RANGE PORM 190 VAC WITHOUT HIGH VOLTAGE AND PORM 1100 VAC WITH HIGH VOLTAGE; IEEE-488 FRONT PANEL INTERFACE
ABKWOVERALL HEIGHT7.000 INCHES NOMINAL

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top