Buy MM5-22PGDS50 Connector Receptacl part by Winchester Electronics Corporation

Part Number:  MM5-22PGDS50
Alternate P/N:  MM522PGDS50
NIIN:  004787293
Item Name :  connector receptacl
CAGE Code:  95238
INC Code:  15093
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for MM5-22PGDS50 (described as Connector Receptacl), manufactured by Winchester Electronics Corporation with CAGE code 95238. This part is registered under NSN 5935-00-478-7293, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-478-7293, NCB code 00 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MM5-22PGDS50 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MM5-22PGDS50

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part MM5-22PGDS50, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MM5-22PGDS50 with NSN 5935-00-478-7293, 5935004787293

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-478-7293

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350047872930PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
134198-000-00158E

Characteristics Data of NSN 5935-00-478-7293, 5935004787293

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2B AND 2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE
ABHPOVERALL LENGTH0.672 INCHES MINIMUM AND 0.702 INCHES MAXIMUM
ABKWOVERALL HEIGHT0.470 INCHES MINIMUM AND 0.570 INCHES MAXIMUM
ABMKOVERALL WIDTH0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
AFQRTHREADED DEVICE TYPECOUPLING FACILITY AND MOUNTING STUD
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLE5 SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS5.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODJACKSCREW
AFRVCONNECTOR LOCKING METHODJACKSCREW-SOCKET
AKMGNOMINAL THREAD LENGTH0.180 INCHES
CQJXNOMINAL THREAD SIZE0.086 INCHES
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC DIALLYL PHTHALATE SINGLE MATING END
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCGINCLUDED CONTACT QUANTITY5 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
FEATSPECIAL FEATURESJACKSCREW TYPE-MALE AND LOCATION-RIGHT HANDANDJACKSCREW TYPE-MALE AND LOCATION-LEFT HAND
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
THSDTHREAD SERIES DESIGNATORUNC

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 1-b2---
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top