Buy KA-91-16 Adapter Connector part by Winchester Electronics Corporation

Part Number:  KA-91-16
Alternate P/N:  KA9116
NIIN:  009057927
Item Name :  adapter connector
CAGE Code:  91836
INC Code:  15091
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for KA-91-16 (described as Adapter Connector), manufactured by Winchester Electronics Corporation with CAGE code 91836. This part is registered under NSN 5935-00-905-7927, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-905-7927, NCB code 00 (origin: USA), and INC 15091. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your KA-91-16 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for KA-91-16

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part KA-91-16, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number KA-91-16 with NSN 5935-00-905-7927, 5935009057927

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-905-7927

Item PartTypeName:

ADAPTER,CONNECTOR

5935009057927P
CIICHCCESDPMICCriticalityENAC
C0
Part NumberISCRNVCRNCCHCCMSDSSADC
000-79700125

Characteristics Data of NSN 5935-00-905-7927, 5935009057927

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A AND 2B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLET-SHAPE
ABHPOVERALL LENGTH1.281 INCHES NOMINAL
ABKWOVERALL HEIGHT0.840 INCHES NOMINAL
ABMKOVERALL WIDTH0.625 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONVIBRATION RESISTANT
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY3
AFQXCONTACT POSITION ARRANGEMENT STYLETNC ALL MATING ENDS
AFQZCONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 ALL MATING ENDS ALL CONTACT GROUPINGS
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODINTERNALLY THREADED COUPLING RING AND EXTERNALLY THREADED SHELL
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS ALL CONTACT GROUPINGS
CQJXNOMINAL THREAD SIZE0.437 INCHES
CQTZCONTACT MATERIALCOPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS
CQYHCONTACT SURFACE TREATMENTGOLD ALL MATING ENDS ALL CONTACT GROUPINGS
CQZGINSERT MATERIALPLASTIC TETRAFLUOROETHYLENE ALL MATING ENDS
CSPTSHELL MATERIALCOPPER ALLOY
CSWMSHELL SURFACE TREATMENTSILVER
CXCGINCLUDED CONTACT QUANTITY1 1ST MATING END ALL CONTACT GROUPINGS
CXCGINCLUDED CONTACT QUANTITY1 2ND MATING END ALL CONTACT GROUPINGS
CXCGINCLUDED CONTACT QUANTITY1 3RD MATING END ALL CONTACT GROUPINGS
CXCLINCLUDED CONTACT TYPECOAXIAL PIN 1ST MATING END ALL CONTACT GROUPINGS
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET 2ND MATING END ALL CONTACT GROUPINGS
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET 3RD MATING END ALL CONTACT GROUPINGS
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE GOLD AND SHELL SURFACE SILVER
PMWTPRECIOUS MATERIAL AND WEIGHT0.015 GOLD GRAINS,TROY AND 0.100 SILVER GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD AND SILVER
THSDTHREAD SERIES DESIGNATORUNEF

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC C - Item contains combination of two or more precious metals (silver, gold, platinum).

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top