Buy ERG404 Bearing Half Sleeve part by Wisconsin Motors Llc

Part Number: ERG404

Manufacturer: wisconsin motors llc

NSN: 3120-00-867-8750

NIIN: 008678750

Item Name : bearing half sleeve

CAGE Code: 66289

FSC: 3120 Bearings Plain Unmounted

INC Code: 22210

Country: USA

NCB Code: 00

FSG: 31 Bearings

We've received your request for ERG404 (described as Bearing Half Sleeve), manufactured by Wisconsin Motors Llc with CAGE code 66289. This part is registered under NSN 3120-00-867-8750, classified in FSG 31 Bearings / FSC 3120 Bearings Plain Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 00-867-8750, NCB code 00 (origin: USA), and INC 22210. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your ERG404 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ERG404

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part ERG404, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number ERG404 with NSN 3120-00-867-8750, 3120008678750

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-00-867-8750 Item PartTypeName: BEARING HALF,SLEEVE	3120	008678750	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
ERG404	6	1	5

Characteristics Data of NSN 3120-00-867-8750, 3120008678750

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM FIRST
ABHP	OVERALL LENGTH	1.1905 INCHES MINIMUM AND 1.1925 INCHES MAXIMUM
ADAR	BODY OUTSIDE DIAMETER	1.7545 INCHES MINIMUM AND 1.7560 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	1.6275 INCHES MINIMUM AND 1.6282 INCHES MAXIMUM
ADZG	LUBRICATION MATERIAL	LUBRICATING OIL
AGAV	END ITEM IDENTIFICATION	28058725972
AGFQ	LEFT FLANGE OUTSIDE DIAMETER	2.3140 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM
AGFR	RIGHT FLANGE OUTSIDE DIAMETER	2.3140 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM
AGFS	LEFT FLANGE WIDTH	0.0810 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM
AGFT	RIGHT FLANGE WIDTH	0.0810 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM
AGKH	LUBRICANT ACCOMMODATION STYLE	GROOVED CIRCULAR
AGKT	LOCKING LUG HEIGHT	0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM
AGKU	LOCKING LUG LENGTH	0.1900 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM
AGKV	LOCKING LUG WIDTH	0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM
BZLX	CORNER SHAPE	ROUND INSIDE LEFT CORNER
BZLX	CORNER SHAPE	ROUND INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	ROUND LEFT FLANGE OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	ROUND OUTSIDE LEFT CORNER
BZLX	CORNER SHAPE	ROUND OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
BZLX	CORNER SHAPE	SQUARE RIGHT FLANGE BODY CORNER
BZLX	CORNER SHAPE	SQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
CTJM	ANTIROTATION/LUBRICATION TYPE AND QUANTITY	1 HOLE
CTLF	HOLE SPACING ANGLE	28.0 DEGREES NOMINAL
CTMQ	SURFACE GROOVE LOCATION AND QUANTITY	1 INTERNAL
CTRQ	DISTANCE FROM LUG END TO END OF BEARING	0.3535 INCHES MINIMUM AND 0.3630 INCHES MAXIMUM
MATT	MATERIAL	COPPER ALLOY INNER LAYER
MATT	MATERIAL	STEEL OUTER LAYER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	FED-STD-66 FED STD 2ND MATERIAL RESPONSE OUTER LAYER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MS13826-1,96906 MFR REF 1ST MATERIAL RESPONSE INNER LAYER
SFTT	SURFACE TREATMENT	TIN OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MS13826-1,96906 MFR REF SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	HALF SLEEVE,EXTERNAL FLANGES BOTH ENDS

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8483308090 (NAICS 332991)	Plain shaft bearings, without housing, except spherical
SITC : 74822	Bearing housings, not incorporatng ball or roller bearings; plain shaft bearings

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	P - 77.5
LTL:	P - 77.5
NMFC:	114870 - Bearing/bushing metal
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings