Buy MS35237 50 Screw Machine part by Zf Industrieantriebe Witten Gmbh

Part Number: MS35237 50

Manufacturer: zf industrieantriebe witten gmbh

NSN: 5305-00-958-5473

NIIN: 009585473

Item Name : screw machine

CAGE Code: D9182

FSC: 5305 Screws

INC Code: 06657

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS35237 50 (described as Screw Machine), manufactured by Zf Industrieantriebe Witten Gmbh with CAGE code D9182. This part is registered under NSN 5305-00-958-5473, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 00-958-5473, NCB code 00 (origin: USA), and INC 06657. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS35237 50 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS35237 50

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS35237 50, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS35237 50 with NSN 5305-00-958-5473, 5305009585473

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-00-958-5473 Item PartTypeName: SCREW,MACHINE	5305	009585473	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
161-68	3	9	5

Characteristics Data of NSN 5305-00-958-5473, 5305009585473

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.182 INCHES MINIMUM AND 0.275 INCHES MAXIMUM
AASB	FASTENER LENGTH	0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
AHYM	NOMINAL THREAD DIAMETER	0.164 INCHES
CMLP	THREAD QUANTITY PER INCH	32
CQBC	MINIMUM TENSILE STRENGTH	60000 POUNDS PER SQUARE INCH
CRSQ	COUNTERSINK ANGLE	80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
CYAU	SCREW MATERIAL	STEEL
CYAW	SCREW MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
CYBA	SCREW SURFACE TREATMENT	CADMIUM AND CHROMATE
CYBE	SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TYPE 2 CLASS3 MIL SPEC SINGLE TREATMENT RESPONSE
THSD	THREAD SERIES DESIGNATOR	UNC
ZZZT	NONDEFINITIVE SPEC/STD DATA	3 TYPE AND 2C STYLE
ZZZX	DEPARTURE FROM CITED DESIGNATOR	AS MODIFIED BY MATERIAL